Dismantling / replacement

It is recommended to use gloves when handling Gyptone tiles in order to avoid
soiling. Demountable tiles must be dismantled so as not to cause damages.

If the tile is stuck, the tile next to it is demounted. Doing this makes it possible to find out what is jamming the first tile.

Avoid pushing the tiles in across the grid as this can scratch the tiles.

Tiles in concealed grids, edge type D1 can only be lifted on one side. When demounting, the tile is lifted on that side and at the same time pulled away from the opposite side, after which the tile can be carefully dismantled.

At edge ends on edge type D1 ceilings there must be two wall springs per tile in
between the edge grid and the tile. The wall spring is a little piece of spring steel
which holds the last tile in place against the wall.

This wall spring must be mounted again after demounting.